What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

Heat Detector LHD-PACC

762291

The resettable linear heat detector LHD-PACC has separate relay outputs for pre-alarm, fire alarm and system fault for triggering detector zones on an alarm transponder 808623.40. Due to the differentiated ambient temperature compensation, the window of the set Alarm temperature balanced and alarm temperature accuracy maintained. The system is resettable after an overheating or fire condition, if the monitoring sensor cable is not temperature above the maximum recoverable temperature, or mechanically damaged. The Monitoring of the sensor line is carried out via the termination module PACC art. no. 762292 ( not in scope of delivery), in which reference measuring resistors for line monitoring are integrated.

Cechy i zalety
Dane Techniczne
Akcesoria
Dokumenty

• Display for system states and measured values
• Collective displays for alarm, fault, pre-alarm and operation
• System parameterization and maintenance via Laptop
• Sensor length 30.5 m to 500 m
• Relay contacts for alarm and pre-alarm
• Optocoupler output for fault
• Separate reset input for resetting 5-28V DC min. 3 seconds
• Use as class A1/A2/B linear heat detector
• Approval according to EN54-22/2015
• Thermal differential activation

Additional Information:
The linear heat detector is connected via an esserbus transponder 808623.40. The Termination module PACC 762292 is not included in delivery and must be ordered separately. Trigger temperature according to EN54-22/2015: Class A1 I/A2I, nominal alarm temperature 66 °C; Class BI nominal alarm temperature 80°C Application temperature according to EN54-22/2015: Class A1 I/A2I = 25°C; Class BI = 40°C

Operating voltage	20 ... 30 V DC
Quiescent current	approx. 31 mA at 20 V DC to 20 mA at 30 V DC (without LCD backlight)
Current consumption	61 mA at 20 V DC to 39 mA at 30 V DC (without LCD backlight and alarm)
Current consumption	85 mA at 20 V DC to 59 mA at 30 V DC (with LCD backlight and alarm)
Contact load	Fault NC optocoupler output 35V DC/80mA
Contact load relay	alarm & pre-alarm 2A/30V DC; 0.25A at 250V AC
Ambient temperature	-20 °C ... +50 °C
Air humidity	< 95 % (non-condensing)
Type of protection	IP 65 (IK 08)
Housing	Polycarbonate
Weight	approx. 0,86 kg
Maximum sensor length	500 m
Dimensions	W: 182 mm H: 180 mm D: 90 mm

Albania	English
Austria	Deutsch
Bosnia and Herzegovina	English
Bulgaria	English
Croatia	English
Cyprus	English
Czech Republic	Czech
Estonia	English
Baltic Countries	English
Greece	English
Hungary	English
Kosovo	English
Latvia	English
Lithuania	English
Macedonia	English
Montenegro	English
Romania	Rumuński
Russia	Русский
Serbia	English
Slovakia	Czech
Slovenia	English
Turkey	Turecki
Ukraine	English

Europe

Oferta

Heat Detector LHD-PACC

762291

Cechy i zalety

Dane Techniczne

Akcesoria

Dokumenty