What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

Sygnal. akust-opt IQ8Alarm Plus z kom. głos. biała obudowa/czerwona lampa

807372WR

VdS Approval G 218031

Addressable, completely bus supplied and short circuit / open circuit resilient combined voice sounder and Visual Alarm Device (VAD) in compliance with EN 54‑3 & EN 54‑23 with integrated voice messages, signaling tones and red light flash for acoustic and optical alarm signaling.
With up to 20 different programmable signaling tones including DIN tone in accordance with DIN 33404 Part 3.
Speech alarm with 5 pre-programmed alarm messages in 5 different languages.
The volume can be set to 8 different levels.
Selection or combination of speech messages and signaling tones as well the volume control are carried out via the tools 8000 programming software.
The optical signaling device is suitable for square signal ranges W‑2.4‑5 to W‑3.6‑8.
The optical signal range is adjustable in 6 sizes via tools 8000.
Signaling device with flat base, suitable for wall mounting.
Optionally, IP base Part No. 806202 with side cable entry and weatherproof protection can be installed.

Same as 807322W, but with an individual combination of up to 5 languages, see special order form in the appendix.

Addressable, completely bus supplied and short circuit / open circuit resilient voice sounder in compliance with EN 54‑3 with integrated voice messages and signaling tones for acoustic alarm signaling.

With up to 20 different programmable signaling tones including DIN tone in accordance with DIN 33404 Part 3.

Speech alarm with 5 pre-programmed alarm messages in 5 different languages.

The volume can be set to 8 different levels.

Selection or combination of speech messages and signaling tones as well the volume control are carried out via the tools 8000 programming software.

Signaling device with flat base, suitable for wall and ceiling mounting.

Optionally, IP base Part No. 806201 with side cable entry and weatherproof protection can be instalSame as 807322W, but with individual text and/or sounds. The maximum recording time per device is 169 seconds.
Addressable, completely bus supplied and short circuit / open circuit resilient voice sounder in compliance with EN 54-3 with integrated voice messages and signaling tones for acoustic alarm signaling.

With up to 20 different programmable signaling tones including DIN tone in accordance with DIN 33404 Part 3.

Speech alarm with 5 pre-programmed alarm messages in 5 different languages.

The volume can be set to 8 different levels.

Selection or combination of speech messages and signaling tones as well the volume control are carried out via the tools 8000 programming software

Signaling device with flat base, suitable for wall and ceiling mounting.

Optionally, IP base Part No. 806201 with side cable entry and weatherproof protection can be installed.

Same as 807322W, but with individual text and/or sounds. The maximum recording time per device is 169 seconds.

Addressable, completely bus supplied and short circuit / open circuit resilient voice sounder in compliance with EN 54-3 with integrated voice messages and signaling tones for acoustic alarm signaling.

With up to 20 different programmable signaling tones including DIN tone in accordance with DIN 33404 Part 3.

Speech alarm with 5 pre-programmed alarm messages in 5 different languages.

The volume can be set to 8 different levels.

Selection or combination of speech messages and signaling tones as well the volume control are carried out via the tools 8000 programming software

Signaling device with flat base, suitable for wall and ceiling mounting.

Optionally, IP base Part No. 806201 with side cable entry and weatherproof protection can be install

Addressable, completely bus supplied and short circuit / open circuit resilient combined fire alarm sounder and Visual Alarm Device (VAD) in compliance with EN 54-3 & EN 54-23 with integrated signaling tones and red light flash for acoustic and optical alarm signaling.

With up to 20 different programmable signaling tones including DIN tone in accordance with DIN 33404 Part 3.

The volume can be set to 8 different levels.

The optical signalling device is suitable for square signal ranges W-2.4-5 to W-3.6-8.

The optical signal range is adjustable in 6 sizes via tools 8000.

Signaling device with flat base, suitable for wall mounting.

Optionally, IP base Part No. 806202 with side cable entry and weatherproof protection can be installed.

Cechy i zalety
Dane Techniczne
Akcesoria
Dokumenty

Urządzenie alarmowe w całości zasilane z magistrali
Kompatybilne z zasilaną pętlą
Niski pobór mocy
Do 13 urządzeń alarmowych na każdą zasilaną pętlę
Każde urządzenie alarmowe ma wbudowany izolator
Wyzwalacz synchroniczny

Właściwości alarmu optycznego:

Zgodność z normą EN 54-23
Kategoria W
Zasięg sygnału do 8,0 m szerokości pomieszczenia do montażu na ścianie
Rozmiar pomieszczenia konfigurowalny za pomocą tools 8000

Właściwości alarmu akustycznego:

Zgodność z normą EN 54-3
Wysokie ciśnienie akustyczne
Głośność programowana w 8 krokach za pomocą tools 8000
20 różnych sygnałów dźwiękowych, w tym sygnał DIN
Wielojęzyczny alarm głosowy w 5 różnych językach
Sygnalizacja alarmowa, ewakuacja i alarm testowy mogą być zaprogramowane w różnych językach
Alarm głosowy, 5 zaprogramowanych tekstów alarmowych i inne sygnały alarmowe typowe dla danego kraju

Informacje dodatkowe:

Zamiennik części nr 807372
Do zmiany ustawień fabrycznych dla zakresów sygnałów kwadratowych EN 54-23 wymagane jest oprogramowanie programistyczne tools 8000 od wersji V1.24.

Typowe dane techniczne:
Prąd spoczynkowy przy 19 V DC	ok. 55 μA
Prąd spoczynkowy akumulatorów centrali	ok. 300 μA @42 V
Napięcie robocze	14 ... 42 V DC
Temperatura otoczenia	-10 °C ... 55 °C
Temperatura przechowywania	-25 °C ... 75 °C
Stopień ochrony	IP 43² IP 56 z podstawą 806202³
Obudowa	Tworzywo poliwęglanowe
Wilgotność powietrza	< 95 % (bez kondensacji)
Kolor	czerwony, podobny do RAL 9010 : półprzezroczysta / częściowo matowa
Waga	ok. 300 g (z podstawą)
Całkowity współczynnik obciążenia	4,5*1 ... 10,9
Wymiary	Ø: 112 mm D: 78 mm Ø: 112 mm D: 93 mm (z podstawką)
Deklaracja	DoP-21431171215
Dane akustyczne:
Współczynnik obciążenia akustycznego	4
Poziom dźwięku	90 db(A) +/- 2 dB @ 1 m / @ 90° / @ ton DIN, dla mowy i tonu 97 db(A) +/- 2 dB @ 1 m / @ 90° / @ ton DIN, tylko ton
Specyfikacja	EN 54-3: 2001 / A1: 2002 / A2 : 2006 / -17: 2005 EN 54-3 Sounder EN 54-3 Voice Sounder
Dane optyczne:
Współczynnik obciążenia optycznego	3 *1... 7,9
Częstotliwość lampy błyskowej	ok. 0.5 Hz*1/1 Hz
Kolor lampy błyskowej	czerwony
Natężenie światła	Zakres sygnału ok. 6,6 cd eff. *1/ maks. 17 cd eff. @ W-3,6-8
Zakres sygnału	W-2.4-5 / 60 m³ *1(fabrycznie) ... W-3.6-8 / 230 m³
Montaż	ściana
Specyfikacja	EN 54-23: 2010 / -17: 2005

*1 Ustawienie fabryczne, konfiguracja za pomocą oprogramowania serwisowego i programistycznego tools 8000.
*2 IP 21C zgodnie z EN 54-3 / -23
*3 Nie używać podstawy do alarmów akustycznych zgodnie z normą EN 54-3

806201 IP podstawka, biała

Albania	English
Austria	Deutsch
Bosnia and Herzegovina	English
Bulgaria	English
Croatia	English
Cyprus	English
Czech Republic	Czech
Estonia	English
Baltic Countries	English
Greece	English
Hungary	English
Kosovo	English
Latvia	English
Lithuania	English
Macedonia	English
Montenegro	English
Romania	Rumuński
Russia	Русский
Serbia	English
Slovakia	Czech
Slovenia	English
Turkey	Turecki
Ukraine	English

Europe

Oferta

Sygnal. akust-opt IQ8Alarm Plus z kom. głos. biała obudowa/czerwona lampa

807372WR

Cechy i zalety

Dane Techniczne

Akcesoria

Dokumenty

Typowe dane techniczne:

Dane akustyczne:

Dane optyczne: