What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

Czujka płomienia FS20X 2IR/UV AL ATEX2GD

FS20X-211-23-6

Czujki FS20X zapewniają najszybszą i niezawodną detekcję w skrajnie trudnych warunkach pracy.

Cechy i zalety
Dane Techniczne
Akcesoria
Dokumenty

Opatentowany Wideband IR ™ podczerwieni w połączeniu z Ultraviolet

Zakres detekcji większa niż 60 m (200 stóp)

Opatentowana elektroniczna analiza częstotliwości

Wybór czułości detekcji

Pole widzenia 90°

Podwójne mikroprocesory dla niezawodnej pracy

Zegar czasu rzeczywistego dla dokładnego datowania czasu wydarzeń

FirePic™ — przechowywanie danych do 6 zdarzeń przed pożarem

Wbudowany port RS-485 Modbus

Wbudowane nieizolowane wyjście analogowe 4-20 mA

Dwa przepusty kablowe M25

Niskie zużycie energii

Wysoka odporność na zakłócenia

zatwierdzone Ex d ATEX /IECEx

CU-TR zatwierdzone

INMETRO zatwierdzone

Spełnia wymagania SIL 2

Certyfikat EN54-10: 2002

Wydajność FM 3260

Szeroki zakres temperatur pracy

Odrzucanie fałszywych alarmów

Minimalne utrzymanie dla bezawaryjnej pracy

Nadaje się do szerokiej gamy zastosowań

Field of view	90° Horizontal Cone of vision, ± 45° from on axis
Sensitivity	Very high (60m), high (45m), medium (30m) and low (15m) - switch selectable
Response time	3-5 Seconds to 0.1 m2 (1 sq. ft.) n-Heptane fire at 30 m (100 ft.) 3-10 Seconds to 0.1 m2 (1 sq. ft.) n-Heptane fire at 60 m (200 ft.)
Power Consumption	24 Vdc nominal (18-32 Vdc) - regulated
Operating voltage	24 Vdc nominal (18-32 Vdc) - regulated
Output Relays	Fire Alarm: SPDT (NO / NC) – De-energised/energized, latching/non-latching Fault: SPST (NO) – De-energised, latching/non-latching Auxiliary: SPDT (NO / NC) – De-energised/energised, latching/non-latching Contacts rating: 1 amp @ 24 Vdc
Analog output	0 - 20 mA stepped - source or sink user selectable
Loop resistance	50 - 400 Ohms
Tempetarure range	Operating: -40 to +85ºC (-40 to +185ºF) Storage: -55 to +110ºC (-67 to +230ºF)
Vibration	Meets or exceeds MilSpec 810C Method 514.2, Curve AW12
Wiring	2.5 mm2 (14 AWG) to 0.326 mm2 (22 AWG); shielded cable recommended
Conduit entries	Two M25 conduit entries
Dimensions	W: 110,4 mm H: 124,2 mm D: 156,4 mm
Housing	Copper-free powder coated aluminum or 316 stainless steel

SM4 Stainless Steel Swivel mounting assembly for FS24X, and FS20X detectors
PSU-12 Universal charger for Test Lamps and Interface Kits. For 110-240 VAC with international plugs
TL-2055 IR Test Lamp for testing FSX detectors, explosion proof version. Incl universal charger
TL-1055 IR Test Lamp for testing FSX detectors, non-explosion proof version. Incl universal charger
SH-001 Sunshield (316 Stainless Steel)

Albania	English
Austria	Deutsch
Bosnia and Herzegovina	English
Bulgaria	English
Croatia	English
Cyprus	English
Czech Republic	Czech
Estonia	English
Baltic Countries	English
Greece	English
Hungary	English
Kosovo	English
Latvia	English
Lithuania	English
Macedonia	English
Montenegro	English
Romania	Rumuński
Russia	Русский
Serbia	English
Slovakia	Czech
Slovenia	English
Turkey	Turecki
Ukraine	English

Europe

Oferta

Czujka płomienia FS20X 2IR/UV AL ATEX2GD

FS20X-211-23-6

Cechy i zalety

Dane Techniczne

Akcesoria

Dokumenty